News & Information

A Tie-on Face Mask is a critical piece of personal protective equipment (PPE) used primarily in surgical and clinical settings to prevent the exchange of respiratory droplets and contaminants. Unlike earloop masks, tie-on versions offer a customizable fit, making them suitable for long-duration procedures. Jianda Medical manufactures high-quality Tie-on Face Masks designed for maximum filtration and user comfort.

This guide outlines the technical factors to consider when selecting a tie-on mask for professional use.

1. Evaluate the Filtration Efficiency

The primary function of a medical mask is to filter out bacteria and sub-micron particles. When choosing a mask, verify its filtration ratings:

• Bacterial Filtration Efficiency (BFE): Ensure the mask meets standard requirements (such as BFE ≥ 95% or 98%) to provide a reliable barrier against pathogens.

• Three-Layer Construction: A professional mask should consist of three distinct layers:

  • Outer Layer: A fluid-resistant non-woven fabric that protects against splashes.

  • Middle Layer: A high-density melt-blown filter that traps microscopic particles.

  • Inner Layer: A soft, absorbent non-woven fabric designed for skin comfort.

2. Assess the Design and Fit

The "tie-on" design is specifically chosen for its adjustability. Consider the following structural elements:

• Adjustable Ties: The ties allow the user to secure the mask around the head and neck, providing a tighter or looser fit as required. This is beneficial for individuals who experience discomfort from earloops during extended wear.

• Nose Wire: A flexible, integrated nose bridge (usually made of plastic-coated wire) is essential. It must be adjustable to ensure a close seal around the nose, preventing air leakage and the fogging of eyewear.

• Pleated Design: The mask should feature a pleated structure that expands to cover the face from the bridge of the nose to below the chin.

3. Consider Breathability and Material Safety

High filtration must be balanced with breathability to ensure the wearer can breathe comfortably during long shifts.

• Differential Pressure (Delta P): Low breathing resistance is necessary to prevent heat and moisture buildup inside the mask.

• Skin Compatibility: Materials should be hypoallergenic and latex-free to prevent skin irritation or allergic reactions for medical staff.

• Low Linting: The fabric must be low-linting to maintain a clean environment in the operating room.

4. Verify Manufacturing Standards and Supplier Reliability

Sourcing from reputable Tie-on Face Mask suppliers is crucial for ensuring product consistency and regulatory compliance. Jianda Medical maintains strict quality control over the production process:

• Compliance: Our masks are manufactured in accordance with international medical standards (such as EN 14683 or ASTM levels).

• Controlled Environment: Production occurs in cleanroom facilities to prevent contamination before the masks are packaged.

• Packaging Options: Depending on clinical needs, masks should be available in bulk boxes or sterile individual packs.

5. Identify the Application Suitability

Tie-on masks are preferred in specific scenarios:

• Surgical Procedures: Where a secure, custom fit is required for several hours.

• Sterile Processing: Where high-level contamination control is mandatory.

• General Clinical Use: For staff who find earloops uncomfortable or insufficiently secure.

Conclusion

Choosing the right Tie-on Face Mask involves evaluating filtration levels, material safety, and the reliability of the manufacturing process. By selecting products from established Tie-on Face Mask suppliers like Jianda Medical, healthcare facilities can ensure their staff is equipped with masks that offer superior protection, adjustability, and comfort.